Descrição

Properties

• Outer sheath of PVC, oilresistant
• Optimum compliance with requirements for elect romagnetic compatibility (EMC) by approx. 85% coverage from the braided screen
• These cables are produced to high quality specifications and conform to the DESINA®-standard
• The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers

Tests

• PVC sheath flame retardant acc. to DIN EN 60332-1-1 bis -1-3 (VDE 0482-332-1-1 bis -1-3)

Technical data

• Special PVC feedback cable acc. to UL AWM style 20233 and CSA
• Temperature range
  • flexing -0°C to +60°C
  • fixed installation -20°C to +80°C
• Nominal voltage
  • acc. to Siemens 30 V
  • acc. to Bosch Rexroth and Lenze 300 V
• A.c. test voltage, 50 Hz
  • core/core 1500 V
  • core/screen 1000 V
• Minimum bending radius
  • flexing 15x cable Ø
  • fixed installation 6x cable Ø
  • min. 100.000 cycles

Cable structure

• Copper-conductor bare or tinned to DIN VDE 0295 cl.6, extra fine-wire, IEC 60228 cl.6;
• Core insulation of special polypropylene;
• Core colours on request;
• Overall screening of tinned copper wire braid with tinned drain wire, coverage approx. 85%;
• Polyester foil;
• Outer sheath of PVC;
• Sheath colour green (RAL 6018) acc. to DESINA® or orange.

Note

• For a corresponding motor- and servocables please check chapter TOPSERV® PVC
• For drag chain capable encoder cables please check chapter TOPGEBER 512 PUR
• Brackets ( ) indicate screen
• SIEMENS product designations 6FX 5008-… are registered trademarks of Siemens AG and are to be used only for purposes of comparison.
• INDRAMAT product designations INK- are registered trademarks of Bosch-Rexroth AG and are to be used only for purposes of comparison.
• LENZE product designations are registered trademarks of LENZE AG, and are to be used only for purposes of comparison.
• DESINA®: Explanation: see introduction.